24V 6A Wall Plug Type Power Adapter

Product Introduction
The 24V 6A Wall Plug Type Power Adapter is the flagship high-power model in the Songyantech wall adapter series, designed for professional applications requiring higher power output and reliable continuous operation.

With a rated output power of 144W, this adapter delivers desktop power supply-level performance in a compact wall-mounted design. Its optimized structure measures only 108.9×58.2×60mm, achieving excellent power density while saving installation space.

The adapter adopts high-quality components and advanced circuit design, achieving over 90% full-load conversion efficiency, with actual measured efficiency exceeding 91%. The ultra-low standby power consumption of only 0.29W helps reduce energy loss and supports energy-saving operation.

Product Specifications
Product Name: 24V 6A Wall Plug Type Power Adapter
Model Number: MA4W-240600-C-0
Specification Model: SY-240600
Rated Output Power: 144W
Input Voltage: 160-240VAC
Maximum Input Current: 2.5A
Input Fuse: Built-in 5A Fuse
Output Voltage: 24V DC
Maximum Output Current: 6A
Output Voltage Accuracy: ±5%
Ripple Noise: ≤300mV
Full Load Efficiency: >90%
Measured Efficiency: >91%
Standby Power Consumption: 0.29W
Overvoltage Protection: 28V Lockout
Overcurrent Protection: 9A Automatic Recovery
Peak Load Mode: Supported, up to 9A output for less than 5 seconds
Short Circuit Protection: Automatic Recovery
Startup Surge Capability: Supports Motor Startup Impact Loads
Withstand Voltage Test: 1800VAC
Insulation Resistance: >30MΩ
Leakage Current: <0.7mA
MTBF: 50,000 Hours
Product Dimensions: 108.9 × 58.2 × 60mm
DC Cable Specification: 18AWG Thick Output Cable
DC Connector: 5.5 × 2.1mm Standard Interface
Cooling Method: Natural Air Cooling
Plug Options: US / EU Plug Standards Available
Customization: Plug and Output Interface Customization Supported

Product Features
144W High-Power Output Capability
The adapter provides a powerful 144W rated output, delivering up to 6A current at 24V DC. It is designed for applications requiring stronger power capacity than standard 24V adapters.

Desktop-Level Performance in Wall Adapter Design
Despite its compact wall-mounted structure, the adapter achieves performance comparable to a desktop power supply, providing high output capability while minimizing installation space.

High Efficiency Energy-Saving Performance
The adapter achieves:

Full-load efficiency above 90%
Actual measured efficiency above 91%
Standby power consumption as low as 0.29W

This reduces electricity consumption, heat generation, and long-term operating costs.

Stable and Clean Power Output
The adapter provides high-quality 24V DC power with:

Voltage accuracy within ±5%
Ripple noise ≤300mV

This helps ensure stable operation for electronic devices requiring clean power input.

Strong Peak Load Capability
The adapter supports peak load mode and can temporarily output up to 9A current for less than 5 seconds, making it suitable for equipment with high startup current requirements, such as motors and pumps.

Long Service Life
With an MTBF of 50,000 hours and completed aging tests, the adapter delivers reliable performance for long-term applications.

Reliability Testing
Strict Quality Control Process
To ensure long-term reliability, each adapter undergoes multiple inspection procedures.

Production Testing Includes:

Electrical Performance Test
Output voltage verification
Current load testing
Efficiency measurement
Ripple noise inspection

Safety Test
High voltage withstand test
Insulation resistance test
Leakage current test

Reliability Test
Aging test
Full-load operation test
Protection function verification

These testing procedures help ensure consistent performance before shipment.

FAQs
Q1: What type of DC connector does it use?

The standard output connector is 5.5×2.1mm, and customized output interfaces are available according to customer requirements.

Q2: Can this adapter handle motor startup current?

Yes. The adapter supports peak load mode and can provide up to 9A current for less than 5 seconds, allowing it to handle startup surge requirements from motors, pumps, and other impact loads.

Q3: What makes this adapter different from standard 24V adapters?

This model provides:

Higher 144W output power
6A continuous current capability

91% measured efficiency

Stronger peak load performance
Professional safety protection

It is designed for applications requiring higher reliability and power capacity.

Q4: What safety protections does the adapter have?

The adapter includes:

Overvoltage protection
Overcurrent protection
Short circuit protection
Input fuse protection

These functions help protect both the adapter and connected devices.

Q5: Does this adapter generate much heat during operation?

The adapter uses high-efficiency circuit design with conversion efficiency above 90%, reducing energy loss and heat generation. The natural air-cooling structure provides reliable thermal management.